No power to fuel pump, won't start.

1993 BMW 325I
140,000 MILES
Avatar
APEXHUNTER
  • MEMBER
  • 4 POSTS
Drove car to work then wouldn't start. I have new fuel pump, new battery. Checked fuses, checked relays no problems. Checked voltage to fuel pump, 0 volts. We checked 2 engine sensors, they are within resistance limits. At a total loss as to what to check now, any ideas? Ready to drive it off a cliff.
Feb 22, 2012 at 12:37 AM
Advertisement
Avatar
BILLYMAC
  • CERTIFIED EXPERT
  • 2,204 POSTS
do you have voltage to relay? if yes turn key on and see if you have voltage to the other side of the relay for approx 3 seconds after key is turned on. if yes go to the pump repeat this test at the pump power wire if no power broken wire between pump and relay
Feb 22, 2012 at 2:33 AM