knock sensor? spun bearings? confusion....

1992 TOYOTA PICKUP
240,000 MILES
Avatar
ALLEN924
  • MEMBER
  • 1 POST
Im having a loud knock in my engine. I have attempted a valve adj. at one time and quieted my tick, about two weeks after the adj. my tick came back and became louder and louder. I noticed while exiting the highway while slowing down I no longer had a tick it became a knock. My neighbor suggested it was a lower engine issue, I agreed thinking spun bearings, now Im not so sure, my oil light comes on at lower rpms and goes out at around 2000rpm any suggestions could be helpful.
Sep 2, 2011 at 2:25 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
The knock sensor only prevents valve ping. That isn't the problem if it is a knock. If you are losing oil pressure at an idle, chances are it is a rod or main bearing.
Sep 2, 2011 at 2:28 AM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Check the oil pressure with mechanical gauge to rule out a failed oil pump-start here
Sep 2, 2011 at 2:29 AM
Advertisement