turning signals

1992 PONTIAC SUNBIRD
6 CYL • 2WD • AUTOMATIC
Avatar
KURTISG904
  • MEMBER
  • 11 POSTS
My turning signals do not work, i think its a connection problem, my bulbs are all fine, and my turning switch works, high beams work, and hazards work, what could be the reason my turning signals dont respond and work?
Feb 7, 2011 at 4:48 AM
Advertisement
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
Check for voltage and ground at turn bulb wiring, dark green wire is voltage for turn signal, black is ground. The key should be on. If no voltage, I'd have to check feed to and from the turn switch.
Image (Click to enlarge)
Attached Media
Feb 7, 2011 at 9:49 PM
Avatar
KURTISG904
  • MEMBER
  • 11 POSTS
where is the dark green and black wire located?
Feb 7, 2011 at 10:38 PM
Advertisement
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
At the rear turn signals. Are you talking about the rear turn signals. Have you ever replaced a bulb? The socket has wires on it. You may have to look on backside of assembly. The info below is for a sunbird rear lamp.
Image (Click to enlarge)
Attached Media
Feb 8, 2011 at 5:32 PM