hellllllllllllllp

1992 JEEP WRANGLER
6 CYL • FWD • MANUAL
Avatar
THALMUS
  • MEMBER
  • 9 POSTS
ok i have an 1992 jeep wrangler it started once while i tested the crankshaft senor wires but and then i tired to crank it the next day and it wouldnt start and now it starts sometimes and sometimes it dont now it just cranks and wont start and it start up every once in
Mar 23, 2011 at 5:18 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
SO do you have spark?What led you to the crank shaft sensor wire's?
Mar 23, 2011 at 5:19 PM
Avatar
THALMUS
  • MEMBER
  • 9 POSTS
nope no spark. after doing some research on line it told me to test the sensor wires
Mar 23, 2011 at 5:27 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Let's test the sensor if you have a multimeter?I posted a diagram of the connector terminals here is how you test it.Let me know what you find.

PROCEDURE

1. Near the rear of intake manifold, disconnect (CPS) pigtail harness connector from main wiring harness.
2. Place an ohmmeter across terminals A and B. The meter reading should be open (no resistance). Replace sensor if any resistance is indicated.
Image (Click to enlarge)
Attached Media
Mar 23, 2011 at 9:49 PM