Why is my 350 TBI missing and cutting off?

1992 GMC TRUCK
200,000 MILES
Avatar
BLUEREBEL14
  • MEMBER
  • 1 POST
92 GMC pickup with a reman. 350 TBI engine misses at idle acceleration. Has plenty of power during driving conditions but cuts back and tries to die when de-celerating. While parked, if you put your foot on the brake and pull it into rev. or forward and put a load on the engine, it cuts off. I've checked the EGR, changed the ECM, plugs, wires, fuel filter, 0 2 censor, distributor, rebuild the throttle body, and still have no luck. Any help would be appreciated.
Feb 2, 2012 at 8:55 AM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Do you have any fault codes, you done a scan yet?
Feb 2, 2012 at 8:59 AM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
-Check the fuel pressure if its within specs and throttle position sensor and manifold absolute pressure sensors

Also refer to this link: https://www.2carpros.com/articles/engine-hesitates
Feb 2, 2012 at 9:03 AM
Advertisement