speeodmeter and odometer

1992 GMC SONOMA
125,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
My speedometer and odometer quit working. I replaced the speed sensor on trans. Checked resistance on the stepper motors in cluster. replaced cluster. Check for voltage going to speed sensor plug=0. Also traced wiring back to firewall. What else can I do?
May 7, 2011 at 4:30 PM
Advertisement
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
I also cleaned plug with electrical cleaner and checked for voltage at the wire and plug.
May 7, 2011 at 4:34 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Raise rear wheels off ground place DVOM meter on AC scale trans in neutral. Rotate tires by hand @3mph meter shloud read .5 - 1 v AC
May 7, 2011 at 4:41 PM
Advertisement
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
Do I take the reading off the speed sensor? If it read good or bad what are the options?
May 7, 2011 at 5:49 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Yes reading off seed sensor this will tell if signal is being produced
May 7, 2011 at 7:13 PM
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
I got readings that jumped from 0 to 1.5 but had to turn the wheels at higher speed to get anything? So what does that mean?
May 10, 2011 at 8:20 PM
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
Is there something simple that I am missing?
May 10, 2011 at 8:54 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Find VSS buffer item F in first diagram on firewall near ECM. Check White Wire term.10 for output to speedo also check input signal from VSS
Images (Click to enlarge)
Attached Media
Attached Media
May 11, 2011 at 1:52 PM
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
I am having a hard time finding the VSS. Is it on the engine firewall or in the cab?
May 14, 2011 at 4:43 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Info I have firewall next to ECM
May 16, 2011 at 8:12 PM
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
Thanks. I found it and fixed it.
May 19, 2011 at 2:03 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Great so it was VSS?
May 19, 2011 at 3:32 PM
Avatar
JESTERGMC
  • MEMBER
  • 8 POSTS
It was a wire grounding out on the fire causing the brake fuse to blow. But I had brake lights the whole time.
May 21, 2011 at 1:52 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Thanks that was an unusual fault good work finding that
May 23, 2011 at 1:42 PM