92 gmc sierra 2500

1992 GMC SIERRA
329,290 MILES • V8 • 4WD • MANUAL
Avatar
NONMECH
  • MEMBER
  • 4 POSTS
92 gmc sierra 2500 how do I remove the clips holding the clutch line? The upper was push on-pull off, is the lower one help by a nut?
Aug 15, 2011 at 9:03 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Master or slave cylinder?
Aug 15, 2011 at 9:12 PM
Avatar
NONMECH
  • MEMBER
  • 4 POSTS
The line runs from the master to the slave. It is about 65 inches long and held by 2 clips. The upper was a push on-pull off. The lower one, just above and to the drivers right, of the transmission is what type? I can hardly see it and it looks like a nut is involved.
Aug 15, 2011 at 9:25 PM
Advertisement
Avatar
NONMECH
  • MEMBER
  • 4 POSTS
I am talking about clips that hold the clutch line in place against the body of the truck. The line is attached to the master and slave by a pin.
Aug 15, 2011 at 9:40 PM
Avatar
NONMECH
  • MEMBER
  • 4 POSTS
I'll answer my own question. Yes it is a bolt. Tough to get out and tougher to put back in.
Aug 16, 2011 at 12:52 AM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Need to use a line wrench to remove metal line
Aug 16, 2011 at 12:28 PM