Back firing geo tracker

1992 GEO TRACKER
124,900 MILES • 4 CYL
Avatar
JOKERJESTER
  • MEMBER
  • 4 POSTS
I have 92 geo tracker 1.6 8v it's backfiring through intake but it does start and run but runs rough with no power has new plugs wires and cap timing is right
Jul 27, 2011 at 6:59 AM
Advertisement
Avatar
RAIDERRON
  • MEMBER
  • 12 POSTS
Needs compression test. Cylinder leakdown test. Suspect valve problem. Some testing is needed.
Jul 27, 2011 at 7:40 AM
Avatar
JOKERJESTER
  • MEMBER
  • 4 POSTS
Yeah I figured . It looks like a new head on it I will test and see
Jul 27, 2011 at 7:42 AM
Advertisement
Avatar
RAIDERRON
  • MEMBER
  • 12 POSTS
Will need to also verify no vacuum leaks. The new head work could have been done wrong or has developed a problem. By the way, next time you ask for help, tell us about the "looks like a new head on it" when you ask for the help in your post. That can make a difference in the replies.
Jul 27, 2011 at 3:53 PM
Avatar
JOKERJESTER
  • MEMBER
  • 4 POSTS
I did leak down test they all test good why is it back firing so bad I tested coil from plug to coil power tested with in specs when I tested prongs it tested 1.5 ohms the specs say .9 ohms is the high
Jul 28, 2011 at 7:42 AM
Avatar
RAIDERRON
  • MEMBER
  • 12 POSTS
If spec is .9 ohms and your reading is 1.5 then yes it is too much resistance but may not be the problem related to backfire. What were the compression test readings? Did you check cam timing?
Jul 28, 2011 at 8:37 AM
Avatar
JOKERJESTER
  • MEMBER
  • 4 POSTS
Compression was good and timing is perfect on belt and distributor and valve lash is good
Aug 3, 2011 at 7:06 AM