1992 Ford Ranger need answers

1992 FORD RANGER
86,000 MILES • 2.3L • 4 CYL • 2WD • MANUAL
Avatar
JKINFORDMAN
  • MEMBER
  • 3 POSTS
i have a 1992 ford ranger 5spd 2.3. recently i
my bottom end went out so i bought a motor out of an old fox body. had to change the head. mine is an 8 plug dual coil pack. that motor had a distributor. we swapped heads went to go put the crank sensor on. there is no holes for the crank position sensor to bolt too. what are ny options?
Feb 2, 2014 at 11:42 AM
Advertisement
Avatar
EMERGENCYTECH
  • EXPERT
  • 26 POSTS
There is no hole for crank sensor because the engine used a distutor to determine timing and cylinder number 1 tdc. I think your going to need the wiring from fox body or get the correct engine thats what i would do
Feb 2, 2014 at 1:07 PM
Avatar
JKINFORDMAN
  • MEMBER
  • 3 POSTS
is there anyway to get holes drilled at a machine shop to make it work?
Feb 2, 2014 at 5:24 PM
Advertisement
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
WHAT ARE YOU GONNA DO ABOUT THE LITTLE MAGNET PERFECTLY DRILLED AND PRESSED INTO THE RIGHT SPOT IN THE CRANK?

THE MEDIC
Image (Click to enlarge)
Attached Media
Feb 2, 2014 at 7:57 PM
Avatar
EMERGENCYTECH
  • EXPERT
  • 26 POSTS
Sorry but drilling a hole is not a option for there is no reluctor on the crank
Feb 3, 2014 at 7:50 AM
Avatar
JKINFORDMAN
  • MEMBER
  • 3 POSTS
holes drilled. trucks running great. thanks
Feb 3, 2014 at 8:41 PM