brake line

Replace the brakeline and the wheel cylinder

The wheel cylinder is brand new

Wheel cylinder new and still leaks now you have to replace the steel brake line

yeap thats what I am going to do I just have to find someone to bend it. I called the dealer they dont have the steel brake line but they said they could get it but it would be expensive for me because they have to buy 25 foot. Napa sells it and the dealer said they have a hydraulic bender to bend it. I would have to flare it though. DO I have to do a double flare. Thanks.

Yes you do-to make sure it doesn't leak anymore its a must -You can check with the local plumbing shop and have them bend it for you -how the OEM part looks like-Your welcome

Thanks for helping me.

Your welcome

Went to napa yesterday bought 2 brake lines all I had to do was bend it. The only problem was it was an inch longer but I got it to work. My dad bent it on the granit counter top it did not kink at all it worked perfectly.

For both brake lines it was about 10 dollars.

You saved money-Good Luck

tried the new lines still leaks out the brake line hole on both sides. I replaced the brake line on both sides. Does this mean the wheel cylinder is bad. Thanks.

Inspect and test the wheel cylinder and the proportioning valve.

When I close the wheel cylinder bleeder screw it doesn't leak. When I open the wheel cylinder bleeder screw it leaks. Through the bleeder screw.

The bleeder screw suppose to leak fluid when in open position, at closed position is shouldn't leak-did you double flare the line fittings

The brake line was already flared when I bought it from napa. But when I open the bleeder screw on the wheel cylinder it leaks out through the brake line and the brake line is as tight as I can get it. When I close it and pump the brakes it doesnt leak out the brake lines.

Is the brake working properly on that side?

Yeah they work great on both sides.

If its not leaking when brakes are applied -you're good to go-

Ok I sent them back already he said he is sending me something different because he thinks those were defects.

Did the replacement work?

Got the replacement ones today and they work great no problems. Their is something I am noticing though when I start the car and press the brakes it goes to the floor. I have not driven it yet so I dont know if it works or not. When I turn the car off and I pump the brakes the pedal builds the pressure up like it is suppose to. Thanks.