how to fix ignition switch issue

sounds like the battery went dead when you were changing the switch. check the battery first. a bad connection with the battery cables to

I know a lil bit about cars to unhook the battery b4 i mess w any electronics. It has factory alarm and ive tried reseting the alarm w the key in all doors and trunk. All fuses are good also

is there a new lock cyl also. check to see if it will start with the ignition switch removed from the lock cylinder use a flat blade to turn it and have the key in the lock assy @ the same time. some times if you kust replace the switch its hard to get them phased proper

Thats how the old switch cranked. Ive tried that. Next?

Is it a new key !

If it wont crank with the lock cylinder pulled out it obviously doesnt matter if its a new key or not.

Then why did you replace the switch with out testing voltage out of it . Are you a parts swaper. Is there power to the switch or did you not test that eather . U stated you knew somthing about cars?

Ok smart guy... My original lock cylinder broke. The part stores dont carry just the replacement cylinder u have to by switch and cylinder. So i pulled the lock out. Was cranking w a pair of needle nose. There is a release point in the switch as it turns back to disengage the starter. It stopped catching that release point. So i could get it to crank but the starter was still engaged the whole time. Instead of releasing the starter and keep running it would either stay cranking or just shut off. So now back to the problem at hand sir.

I'm trying to help you. I don't know your skill level. Tell me this do your headlights work ? How much of the elect shstem is dead. I need to know if we are looking @ a theft problem or a basic no crank problem .

Everything is dead. No int or ext lights. No horn. No dash. No elec locks. But the door chime is barely ringing. Theres a relay next to radiator that clicks when it chimes. If i turn the headlights on there is no light but a different relay clicks. This one is in box next to driver side strut. For a sec the normal door chime came back but when i turned key it stopped and started chiming different and quieter. Ive hooked jump box to battery but it makes no difference. The battery is new and not the prob..

Ets stary hear do you have voltage on the black with white wire out of the ignition switch. It goes to the starter cut relay which is in the under dash realy box.

When cranking check it

Ok. So i got the ignition switch to work. It turns the car over but it wont start. I think it has something to do with the security system. Its turns over but its like its not getting any gas so it must be the fuel kill. Ive turned the key in every door but its not reseting. Ive also locked the door, reached in the window to try and set alarm off but nothing happens. Its like the fuel is killed but the alarm wont go off from the door opening. Ive unhooked the battery and unplugged the security box under the hood. Plugged everything back in but it still doesnt reset alarm and it still just turns over without starting. So, is there any other way to rreset the security or completely bypass it?

F the key is new honda will have to reprogram

Ive tried it with my old key and the one that came with the switch. Neither key will work. Its not the key. The security alarm doesnt work on the doors. It wont sound the alarm when i try to set it off. Ive taken cylinder out and tried cranking w pliers but it just turns over and over. Need to find a way to reset security or disconnect.......

I finally got the security system to come on. Alarm and kill switch are working. But it still wont start. Just keeps turning over. I disconnected the fuel line under hood and its not getting gas. Put on new fuel pump relay. Still no gas. Does the security kill the fuel pump. If the rest of the security is working im gonna guess that the fuel pump is being stopped by security or the pump is bad. Ive never had pump issues b4 so is it possible that it just went out? It was working fine the other day.

Dropped the gas tank and pulled the fuel pump. Hooked fuel pump to battery and pump is goin full blast. So im not getting power to the fuel pump for some reason. Any ideas???

Let me check a wiring diagram and get back to you

im sending you the wireing for the fuel pump realy and computer note all the fuses for the pgm relay. see if the computer is grounding the green-black wire .@ the pgm relay.