TBI fuel pressure sensor

1991 PONTIAC SUNBIRD
180,000 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
VERN1939
  • MEMBER
  • 15 POSTS
i amhaving trouble with flooding TBI carb. bottom is covered with raw fuel.
checked injector with ohm meter ok. getting 12v to injector when key on.
dont see pulses to injector.
is my fuel pressure sensor on side of carb related?? i get 6v on one pin of sensor.

needing help.

thanks Vern (know what I mean)

Nov 17, 2010 at 11:07 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
No injection pulses check the injector ground driver circuit on the computer-fuel pressure regulator leaking/fuel metering body-
Nov 17, 2010 at 11:10 PM
Avatar
VERN1939
  • MEMBER
  • 15 POSTS
I need a new pressure regulator probably huh?
will get one and put it in to seee how itgoes.
thank you

Vern
Nov 19, 2010 at 11:00 AM
Advertisement
Avatar
VERN1939
  • MEMBER
  • 15 POSTS
installed a throttle body fuel sensor

still flooding

will check voltages


Nov 20, 2010 at 5:10 PM
Avatar
WUTSUPY
  • MEMBER
  • 59 POSTS
Ahhh it could be a broken o ring on injector just something to check
Nov 20, 2010 at 8:33 PM
Avatar
WUTSUPY
  • MEMBER
  • 59 POSTS
It could be a broken o ring on injector. Just a easy thing to check
Nov 20, 2010 at 8:35 PM
Avatar
VERN1939
  • MEMBER
  • 15 POSTS
will check again "OHHH" ring (;}) again, looked good first examination.

still looking for illustration. thanks whats up.

Nov 21, 2010 at 1:47 PM
Avatar
VERN1939
  • MEMBER
  • 15 POSTS
hey rasmataz, where is the driver and how do i check it?? voltage to be seen, etc...

thanks vern1939
Nov 22, 2010 at 1:47 PM
Avatar
VERN1939
  • MEMBER
  • 15 POSTS
wow, changed ohh rings, gas everyplace

voltage to injector 12v (key onl only) g etting sprayed iwth gas
voltage to tbi sensor (new one) key on 6 vol at number two pin *left most pin when viewed from tnd of wires.

sensor pins 1
2 3
HHHHHHHHHEEEEEEEEEEEEEEEEEELLLLLLLLLLLLLLLLLLLPPPPPPPPPPPPPP

THANKS VERN1939
Nov 22, 2010 at 7:37 PM