1991 MAZDA RX7
100,321 MILES
Avatar
JOLE1987
  • MEMBER
  • 3 POSTS
Car wants to start but wont. I have replaced plugs,wiers and fuel injectors. Car gets fier spits and sputters while turning the key but never fully starts. Ran a compression check i have 90 pounds on each side. I have tried the unflooding game many times with this thing. Not sure what the deal is. I crank on it about five times and then pull the plugs and they are wet with what i think is oil and gas. Should i change the oil because it might be to thin from all the flooding or do i have a bigger problem like a seal some where has blown. Its a non turbo B 13 motor. Im not a rotory guy by no means. Got the car from a junk yard for 600 bucks so if i cant save it im droping my ls1 under the hood. Thanks you
Oct 28, 2012 at 12:36 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
disconnect the injectors, add a little oil to the vanes and see if it starts. big issue with flooding.

Roy
Oct 28, 2012 at 3:01 AM
Avatar
JOLE1987
  • MEMBER
  • 3 POSTS
What kind of oil and where do i add it at.
Oct 28, 2012 at 7:15 PM
Advertisement
Avatar
JOLE1987
  • MEMBER
  • 3 POSTS
Car is running now all i did was pull start it behind my brothers truck. Now it starts every time. Thanks for the info
Oct 28, 2012 at 11:14 PM