Is the " ALL " indicator light flashing or remaining on all the time?
If there is a fault in the system, you would need to rectify it for the system to work correctly.
Try this first.
SELF-DIAGNOSTIC SYSTEM
Turn ignition off. Check and adjust tire pressure as necessary. Ensure vehicle is on a flat, smooth surface. Remove any cargo, luggage or other load in vehicle. Ground MD7Gray wire terminal of check connector located in left rear corner of engine compartment. See Fig. 2 . Turn ignition on, leaving engine off. Ensure vehicle has returned to normal riding height. Monitor ALL indicator (LEVELLER) light flashes.
See INDICATOR LIGHT FLASHING PATTERNS . Each flash pattern is separated by a 2-second pause. Note indicator light flash patterns and check appropriate system and/or sensor malfunction.
Images (Click to enlarge)
Dec 30, 2012 at 9:05 AM