1991 CHEVROLET LUMINA
280,000 MILES
Avatar
PILOTBILL
  • MEMBER
  • 86 POSTS
I have one more question about my 1991 Chevrolet Lumina 3.1 Liter V6 Engine. If I am correct, the big valve is the exhaust and the small valve is the intake. Is this correct? I also wish to thank HMAC300 for his helpful information on the STEP-BY-STEP valve adjustments (which I haven't done yet). Before I do the adjustments, I must be sure which valves are the exhaust and which valves are the intake. Thank you all again.
Oct 28, 2012 at 8:14 PM
Advertisement
Avatar
CARADIODOC
  • CERTIFIED EXPERT
  • 34,306 POSTS
Intake valves are larger because barometric pressure, (engine vacuum), is all that makes the air go in. Exhaust valves don't have to be so large because pressure from the piston pushes the exhaust out. Intake valves are cooled by the air and fuel coming in. Exhaust valves have hot exhaust gases passing over them so they have to cool while they are seated by transferring the heat across the seat. With a smaller diameter, that heat has less distance to travel. That prevents the valve from melting and burning away.
Oct 28, 2012 at 8:28 PM
Avatar
RIVERMIKERAT
  • CERTIFIED EXPERT
  • 6,110 POSTS
Pilotbill, was that the information you were looking for?
Oct 31, 2012 at 11:14 PM
Advertisement