Pool of Gas in TB

The TB is leaking check the fuel pressure regulator/meter body

but would that prevent gas getting in to the cylenders?

Its leaking and its flooding out the engine-

oh true, ya it dont pop off at all. And one more thing, that gas has been sitting in there over this weekend, do you think if i turn it over a bunch with the plug pulled for the injector it would use that fuel up than pop off?

If it doesn't want to pop off -check if you're getting spark

Sorry I dint give you all the details, ill start from the beginning. A few years ago it stopped getting gas and would not run. Me and dad poured gas in the throttle body and it would run. I replaced the pump, fuel filter, injector, fuel pump relay, wires. It still did not work so me and my friend hauled it to school. There we replaced the oil pressure switch. Still no gas than we hot wired the pump and replaced the ignition module. Than we got a injector pulse and gas, it would now inject. We than tried to start it but it wouldn't start so we sprayed ether in the throttle body and it wouldn't start so we checked for spark, it does get spark. We than called my dad to help us out and he noticed the pool of gas. The thing is it ran before we replaced the ignition module and that was only 2 weeks ago

Check the fuel pressure if its within specs and also if the injectors are pulsing and getting spark again-start again

ok pressure is good, injectors are pulsing and its getting spark

Check the valve and ignition timing

Ok, it seems good, like it all lines up when it is spose to . I dont think its the timming it has to be in the gas system from the TBI to the intake valves.

it all seems right like its all linning up right. i dont think its the timming it has to be in between the TBI and the itake valve.

like the gas is not getting in to the intake

Remove the sparkplugs and check if its getting fuel if it is-check the valve and ignition timing again-get this done and then comeback with results

ok, how would i check if its getting gas? do the trick were you put t towel over the plugs and turn it over?

Ok it is not getting gas in cylenders, the timing checked out ok. ( shop teacher is telling me that) so from what i understand the gas just pools in the intake insted of coming into the cylenders. What could cause this? the air idler valve?

or should i just take the intake manifold off and see if its being clogged?

Remove the intake and investigate thoroughly

Ok i just started that too and it should be interesting to see what it is. i should have it tore apart and have pictures up by tomaro.