shifting problems

1990 MAZDA B2200
177,000 MILES • 2.2L • 4 CYL • 2WD • AUTOMATIC
Avatar
JAMES WILLIAMSON2
  • MEMBER
  • 1 POST
The automatic transmission will not shift out of first gear. It will shift into second above thirty mph when the overdrive is engaged, but still will not shift into third. It was working okay before a fluid change. This is my friend's truck and I was not present when he changed the fluid and filter. Everyone he has talked to so far says he needs a new or rebuilt transmission.
Jul 9, 2017 at 12:31 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
make sure fluid is full. if fluid was dark brown or black when removed originally it is probably time for a rebuild. scan for codes see picture and it is a series for check engine light flashes normally 1 three times 2 three times is 12.

Here is a guide

https://www.2carpros.com/articles/diagnostic-trouble-codes-for-1995-and-earlier-mazda-cars-obd1


Also, the filter may not be tight against valve body or maybe leaking air due to two gaskets as original may not have come out. Picture shows wire grounding out to get codes on right fender well. fluid should be Dextron II or M-111atf or compatible. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Image (Click to enlarge)
Attached Media
Jul 9, 2017 at 1:24 PM
Avatar
63SAMMY
  • MEMBER
  • 1 POST
I had this problem and had to have the transmission rebuilt cost me $1100.00
Jun 1, 2019 at 3:30 PM
Advertisement