V8 MODELS - 5.0L & 5.7L (VIN 7)
"B" & "D" Bodies
Disconnect negative battery cable and remove air cleaner and fan shroud. Raise vehicle and drain crankcase. Remove cruise control servo bracket (if equipped).
Remove Air Injection Reaction (AIR) hose-to-catalytic converter pipe. Remove AIR pipe-to-exhaust manifold. Remove the exhaust crossover pipe at manifold and converter. Remove starter and flexplate access cover. Disconnect transmission line bracket at oil pan. Remove engine mount through bolts.
Remove oil pan bolts and lower pan. Position front crankshaft throw and/or counterweight on horizontal plane so it does not interfere with oil pan removal. Raise engine, reinstall through bolts and remove oil pan.
V8 MODELS - 5.0L & 5.7L (VIN 8)
"F" Body
Disconnect negative battery cable. Remove air cleaner, fan shroud and distributor cap. Raise vehicle and drain crankcase. Disconnect exhaust pipe at manifold, Air Injection Reaction (AIR) pipe clamp and catalytic converter hanger bolts.
Remove front starter brace, starter and flexplate access cover. On models with M/T, it may be necessary to remove oil filter for access to flywheel cover bolts.
Remove engine mount through bolts and oil pan bolts. Raise engine and lower pan. Position front crankshaft throw and/or counterweights as to clear oil pan. Remove oil pan.
V8 MODELS - 5.7L (VIN 8)
"Y" Body
Disconnect negative battery cable. Raise vehicle and drain crankcase. Remove oil filter. Remove oil filter adapter at block. On A/T models, remove flexplate cover. On M/T models, remove starter and bellhousing cover.
On all models, remove oil cooler pipe at oil pan. Remove Electronic Spark Control (ESC) shield. Remove front crossmember braces. Remove oil pan bolts. Remove oil pan.
Mar 17, 2012 at 8:55 PM
