My timing belt is not turning when cranked?

1989 TOYOTA CELICA
25,000 MILES
Avatar
KEVINWHITING1
  • MEMBER
  • 2 POSTS
Did I rip teeth off the belt?? or could it be more complicated....

No spark, Cranking exceedingly fast
any ideas???
Oct 1, 2011 at 10:01 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Either the belt is broken or the teeth are ripped off. The fast cranking is because the valves are open and there is no compression in some of the cylinders.
Oct 1, 2011 at 10:03 PM
Avatar
KEVINWHITING1
  • MEMBER
  • 2 POSTS
Should I cut the belt to see if the teeth are indeed ripped off????
Oct 1, 2011 at 10:12 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
I would remove the belt and check it and replace if needed. Please note that the engine will need the timing properly reset when installing a new belt.
Oct 1, 2011 at 11:20 PM