Head gasket

1989 MITSUBISHI MIGHTY MAX
140,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
ZOMBIEKILLER
  • MEMBER
  • 1 POST
I had a leaking head gasket on my 1989 mitsubishi mighty max with a 2.0. I changed it and have driven it about a 1000 miles and i have noticed that it is leaking oil around the head gasket. Will retorqueing solve the leak or do i need to do something else.
Dec 6, 2010 at 6:04 PM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
You can try retorquing but you need to confirm if the leak is from the head gasket.

Any leakages from the valve cover gasket and the distributor can drip done and look like the head gasket is leaking.
If it is from the timing belt side, check the camshaft oil seal.

If retorquing fails, you would have to replace the gasket again. This model seems to have the tendency to leak from there and I would suggest using gasket sealant around the oil pressure hole of the gasket before installation.
Dec 6, 2010 at 8:56 PM