89 amigo runing rough after timing replaced

You need to get the codes pulled to find out what that light is telling you.

i am trying but finding someone to let their reader go for an hour is difficult. and i cant drive it so it is proving difficult. will post when/if i get them. thank you

just called parts house by home - they charge $300 (retail price for reader) to take it and go home to read codes. looks like i am going to fly blind on this. thank you for you direction. i knew i needed the codes but i didnt realize that a flashing light was so aloof. (smile)

good day.

The reader isn't going ton work on that truck anyway. It's too old.

well i was able to talk to a manager and since i have basically paid their salary for a month with the parts i have bought over the past 2 weeks they loaned me the code reader for 20 minutes.

P0301 - cyl 1 misfire
P0122 - TPS low voltage
P1122 - TPS circuit low voltage

im not worried about the last 2 because i know what caused those. i had the belt off while starting and the alternator was not providing voltage.

the 301 though is bothersome because this car was running before i put the timing belt on and now i have this error code. i am going to replace the plug wires, i already replaced the plugs.

I am looking at the firing order and i am wondering if the previous owner made some wire swaps because of an idiot moment they had.

I am trying to figure out how to identify the wire to socket arrangement on the ignition coil. i dont feel any numbers (cant see it because of location) so i guess my question is what wire goes where?

i am going to continue to look. thanks for any help.

Do you have a correction to make on the year of your truck?

yes. my bad - typo. it is a 98.

one additional note is that i pulled the plug 1 and did a spark test. it has nice blue spark. however i went ahead and pulled all of the plugs and i noticed that they are all solid black - like the fuel is not burning.

i am confident it is a misfire issue. i am going to try and figure out how to test the resistance on all the electrical connections. i still havent found a picture or note that says 1,2,3,4 position on the coil. i am assuming that from left to right (looking at motot from front of car) is 1,3,4,2 but we know what assume does...

well i got it started (not running) last night. it will not stay running though. it is almost like it has no fuel or air or spark or something that causes that explosion that produces power. it starts and as long as i have it throttled up high it will run but it cant idle at all. the motor looks like a caged bull wanting to jump out of its fence.

i did drive it and there is ZERO power.

thoughts?

Each cylinder is paired with the cylinder that is opposite of it (1-4 or 2-3). The spark occurs simultaneously in the cylinder coming up on the compression stroke and in the cylinder coming up on the exhaust stroke.

i did finally see on the coil pack that the order was on there in microfine print (1,4,2,3) that helped get it started. just cant keep it running now.

i had kinda the same prob with my 2000 amigo and all i did was reset all my codes to zero and then un hoocked the batt. some time the simple things work .....scott

And you think that fixed something?

Throwing away your report card doesn't make the "F" go away.

not sure clearing codes will fix my issue but once i have all the compression checked and ensure i have good parts in all places it could be bad... i will drive to parts house and clear codes if the computer doesnt do it on its own.

well made it home last night and pulled all the plugs to check compression.. cyl 1 and 4 are ZERO compression. i am pulling the head off and hoping that it is a the head gasket. but that is just a wild hope.

You've got bent valves

can they be pulled and replaced? i am looking for a machine shop to check the head but thought i would ask

Pull the head and send it to the machine shop.