1989 GMC Jimmy brake

1989 GMC JIMMY
92,000 MILES
Avatar
CHUCKLES89
  • MEMBER
  • 1 POST
How do I remove rotors on 1989 gmc jimmy full size with th 5.7 v8 and 4x4 was told u have to remove hubs but I cant figure out how. Theres no hub nut far as Ican tell my next move would be to pull everthing of the steering want to see if theres a better way
Jul 12, 2013 at 6:31 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Here are the directions I have from my manual:

1) Raise and support the front end on jackstands.
2) Remove the wheel.
3) Dismount the caliper and wire it out of the way.
4) Remove the dust cap, cotter pin, nut and washer.
5) Remove the hub/rotor and outer bearing. Do not drop the wheel bearings. The inner bearing assembly will remain in the hub and may be removed after prying out the inner seal. Discard the seal.
Jul 12, 2013 at 7:13 PM