why fluid is not going through bleed valve, what operated the check valve or plunger?

you may have a failed master cylinder. check it for pressure at the line at the top.

Roy

i will have to take the master cylinder of to remove the line, because the line fit into the master cylinder and then a pin go through it, is there another way i can check for pressure, i want to about the plunger at the other end how it work.

remove the line from the bellhousing and pump the pedal and see if there is any pressure.

Roy

if i remove the line from the bellhousing and pump the pedal if there no pressure then or no fluid run out the line, what i do next.

replace the master cylinder

Roy