Wheel cylinder removal

Here is a guide to help you remove the wheel cylinder and a diagram below. Sometimes the wheel cylinder can get stuck you need to tap it with a hammer to break the rust loose.

https://www.2carpros.com/articles/how-to-replace-a-wheel-cylinder

Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.

Cheers

I need to know how to install the ring clip in the wheel cylinder is their a special tool? I am replacing them with brand new wheel cylinders. Just need to know how to install them they have a ring clip.

Here you go it shows the tool removing it. Says you can use two awls to remove it.

Okay and how to I install the new rings? I really appreciate you helping me.

Okay, I got the response on installation so I use a 1 1/8 socket and extension but do I hammer it or what?

No problem that is what we are here for. Also, look next removing the clip I posted how to install it.

Yes thanks I just wanted to know do I use a hammer to tap on the extension bar to make the ring snap on?

Yes, you drive it into place so you could use a hammer if needed.

Okay, thanks I just made a small donation I appreciate your help.Thank you.

You are welcome. That is what were here for. Thank you for the donation.