I got the switch unplugged, but I don't see any wat to release the lever from the multi-function switch. How do I get it off?
Oct 5, 2011 at 2:48 AM
My cruise control switch broke. How do I get it out to replace it?
1988 BUICK ELECTRA
PSTRMC
- MEMBER
- 4 POSTS
- FOLLOW
Advertisement
Isn't this all one piece? The signal switch and the CC switch? I'm trying to picture how they were in 88.
Oct 5, 2011 at 3:11 AM
The CC Switch is on the end of the wand/lever. After some research, I need to clarify that the wand/lever goes into the turn signal switch instead of directly into the multifunction switch. I don't know if the wand/lever can be removed from the signal switch independently or if the whole wand and signal switch have to be replaced together.
Oct 5, 2011 at 4:57 PM
Advertisement
Yes.
Oct 5, 2011 at 5:06 PM
I believe it is all one switch.
Oct 5, 2011 at 8:57 PM
I got it figured out. The lever pulls out of the turn signal switch with a little effort. There is an indent around the rod that goes into the switch. This is under pressure to hold it in place. Thanks for the responses.
Oct 7, 2011 at 3:04 PM
Glad you got it taken care of.
Oct 8, 2011 at 3:49 AM