1987 Suzuki Mehran Dragging clutch

1987 SUZUKI MEHRAN
550,000 MILES • 0.8L • 3 CYL • FWD • MANUAL
Avatar
ARSHAD SADAL
  • MEMBER
  • 1 POST
I just rebuild engine of my car and replaced the flywheel, pressure place, clutch plate, thrust bearing, clutch cable, and also check all that was possible related to clutch system. I adjusted the cable to extreme low and high as well. The issue is my car keeps on moving in first and second gear even if the clutch is fully depressed. This mostly happens when I am in traffic jam and need to move car in first or second gear. When this happens it becomes very difficult to change gear from first to second.
Dec 3, 2014 at 3:09 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
we don't have an y info on that model in U.S. the pic I'm sending is out of a samurai . check to see if shaft has any wear in bushings etc. or teeth the push in throw-out bearing.or where the cable hooks up as it may be worn there and not fully engaging the clutch
Dec 3, 2014 at 8:38 AM