1986 Mazda b2000 crankshaft/timing gear removal

1986 MAZDA B2000
150,000 MILES • 1.9L • 4 CYL • RWD • MANUAL
Avatar
THKILROY
  • MEMBER
  • 1 POST
How is this to be done? We've lubed it, gear puled it with a couple of different pullers. We've heated the gear and tried. Tapping it with a ball peen hammer. I've even prayed and cursed directly over it. Yelled, sang, ignored and even tried to reason with it. Nothing...Engine is removed from the truck and head is off of the block. Please, any suggestions?
Thank you very much.
Tom Kilroy
Feb 3, 2015 at 3:56 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
did you take the bolt out? it may have a keywat that has turned if so will need to be pressed off of cam. gear on back side of cam is part of cam arrow points to keyway in pic
Image (Click to enlarge)
Attached Media
Feb 4, 2015 at 6:07 AM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
sorry looked at wrong thing if bolt and washer are out then it may be keyway problem and need to be pressed out we have no pics of this
Feb 4, 2015 at 6:11 AM
Advertisement