1985 Dodge 600 No power to coilput

1985 DODGE 600
90,000 MILES
Avatar
RON MARKS
  • MEMBER
  • 3 POSTS
Put in new ignition pickup in distributor ,replaced power module ,all fuses good but still no power to coil where do I start all connections are good the car ran hit a bump and died now won't start what else can i try is there a cut off switch
Nov 1, 2013 at 4:03 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
It's been a while since I worked on an 85... Do you have a crank sensor on this vehicle?
Nov 1, 2013 at 5:03 AM
Avatar
RON MARKS
  • MEMBER
  • 3 POSTS
No it has distributor and I bought a new ignition pickup that goes under rotor in distributor
Nov 1, 2013 at 6:45 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Do you have a seperate ignition control module?
Nov 1, 2013 at 8:12 AM
Avatar
RON MARKS
  • MEMBER
  • 3 POSTS
The power module on fender that looks like an air box I replaced that also
Nov 1, 2013 at 11:35 AM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Have you checked for power (to the coil) right at the control module? You could have a broken wire.
Nov 1, 2013 at 4:53 PM