how do i ajust engien idle speed

1984 DODGE TRUCK
55,000 MILES
Avatar
DODGEMAN89
  • MEMBER
  • 2 POSTS
i removed the destributor to replace the pick up coil and now the truck idles very high one way when we turn it and all the way the other way it is still ideling high when the destibutor is turned all the way the other way
Jul 14, 2012 at 8:16 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
you may have removed or knocked off a vaccuum line. check them.

the timing must be set with a timing light. the spec is about 5 degrees before top dead center plus or minus 3 degrees

Roy
Jul 14, 2012 at 8:18 PM
Avatar
DODGEMAN89
  • MEMBER
  • 2 POSTS
checked all hoses and have put light on it but the destibutor wont turn anymore to bring the idle speed down
Jul 14, 2012 at 8:35 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
distributor wont bring the idle speed down. it is for timing.

if this did not have the issue before your repair, check the linkage on the carb for hanging up. I assume it is carb.
that may be the high idle issue. set the timing at base isle, not the high idle.

Roy
Jul 14, 2012 at 9:10 PM