1981 Ford F-250 Engine or transmission

1981 FORD F-250
185,000 MILES • 4.9L • 6 CYL • 4WD • MANUAL
Avatar
DODGENWW
  • MEMBER
  • 56 POSTS
Ok I replaced the clutch in my truck and drove the first day just fine no problems then the second day wen it got up to temperature it started making this loud knocking noise and I have cleaned all the rods the oil pump new pickup screen and tube for the oil pump but still the same thing and wen its cold the noise isn't as loud as wen it warms completely up
Nov 1, 2015 at 12:03 PM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
You will have to check the oil pressure and post the results, use a mechanical gauge and send the readings cold idle, hot idle and hot 1500RPM
Nov 1, 2015 at 12:42 PM
Avatar
DODGENWW
  • MEMBER
  • 56 POSTS
C1 60lbs all the way
C2 80 all the way
C3 80 all the way
C4 90 all the way
C5 60 all the way
C6 60idle 70 the other two
Nov 2, 2015 at 12:07 PM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
What is C1 etc
Nov 2, 2015 at 4:03 PM
Avatar
DODGENWW
  • MEMBER
  • 56 POSTS
60 all the way
Nov 2, 2015 at 5:11 PM
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
I don't understand, i need pressure readings at idle, hot and cold and at 1500rpm all the way??? just the readings as i need please.
Nov 3, 2015 at 1:30 AM
Avatar
DODGENWW
  • MEMBER
  • 56 POSTS
Those are the readings I got
Nov 3, 2015 at 3:37 AM
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Sorry your language must be local terms and means nothing to be, i need idle psi, idle hot psi, 1500rpm psi and that's all, in that order, if you cant post what i need i cant help you.
Nov 3, 2015 at 12:35 PM