1980 VOLKSWAGEN RABBIT
132,000 MILES
Avatar
EDLONGABAUGH
  • MEMBER
  • 3 POSTS
1980 Rabbit alternator replacement--how do you access the bolt that holds it in place? It's covered by a belt cover; can't see how to get the belt cover off.

Thanks,
Ed
Nov 24, 2012 at 6:45 PM
Advertisement
Avatar
EXOVCDS
  • CERTIFIED EXPERT
  • 1,883 POSTS
6mm allen socket or 13mm hex head socket through the little access hole.

There's room for a Ratchet and either of those sockets... break the bolt loose, remove the ratchet and turn the socket by hand until you can
remove the bolt (remove socket from bolt before pulling bolt out).

Thomas
Nov 24, 2012 at 7:12 PM
Avatar
EDLONGABAUGH
  • MEMBER
  • 3 POSTS
Will try, thanks.
Nov 24, 2012 at 7:14 PM
Advertisement
Avatar
EXOVCDS
  • CERTIFIED EXPERT
  • 1,883 POSTS
If there is no access hole... take and post a picture of your cover, so that I can mark the mounting points for the cover that you
need to remove for the cover to come off.

But there should be an access hole (might be hidden by a plastic pop-in-out cover).

Thomas
Nov 24, 2012 at 7:47 PM
Avatar
EDLONGABAUGH
  • MEMBER
  • 3 POSTS
Worked great. Didn't notice the port. Thanks.
Nov 24, 2012 at 11:37 PM
Avatar
EXOVCDS
  • CERTIFIED EXPERT
  • 1,883 POSTS
Thanks for the update!

Thomas
Nov 24, 2012 at 11:39 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
qusestion answered
Nov 26, 2012 at 2:55 PM