1978 Chevrolet Truck Brake System

1978 CHEVROLET TRUCK
5.7L • V8 • 4WD • AUTOMATIC
Avatar
MJFLORES071578
  • MEMBER
  • 1 POST
When engine is off brakes are blead good once i turn engine on brake pedal goes all the way to afloor board. Changed booster, brake master cylinder, cylinder on drums, and proportioning valve. Checked for leaks and nothing. Blead the master cylinder alone. Still nothing. Can that happen if the parking cable is not installed and or if the proportioning valve is disc/disc and not disc/drum how its suppose to be?
Jul 15, 2014 at 2:04 PM
Advertisement
Avatar
CJ MEDEVAC II
  • MEMBER
  • 222 POSTS
SNATCH OFF YOUR REAR DRUMS

MANUALLY ADJUST THE SHOES OUTWARD TILL THE DRUMS WILL BARELY GO ON (WITHOUT BANGING THEM ON)

SEE IF THIS RAISES YOUR PEDAL

IF NOT, EXPLAIN YOUR "BLEEDING PROCEDURE" IN MORE DETAIL

THE MEDIC
Images (Click to enlarge)
Attached Media
Attached Media
Jul 15, 2014 at 4:01 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
check to see if the valve is good on the booster where the vacuum goes in. the proportioning valve shold be what the truck has disc drum or disc disc. same for master cylinder. also do what cj said.
Jul 15, 2014 at 4:18 PM
Advertisement