dome lights 67cadillac

1967 CADILLAC DEVILLE
120,000 MILES • V8 • 2WD • AUTOMATIC
Avatar
RSTPN
  • MEMBER
  • 4 POSTS
all my dome lights on my 67 Cadillac deville went out all at once check all fuses does it have a relay switch for this year car if so were is it located"!

Mar 21, 2011 at 12:46 AM
Advertisement
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
u need to remove it and ck. for power and ground with a test lite gl
Mar 21, 2011 at 1:51 AM
Avatar
RSTPN
  • MEMBER
  • 4 POSTS
are you saying that the 67 cadillac does have a dome light relay if so where is it located i cant find it
Mar 21, 2011 at 4:04 PM
Advertisement
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
constant power is to that light.it is fuse controled check all fuses with a test lite. if good remove lense and check for power on orange wire if u have power replace the bulbs.there is no relay. do they work when u open any doors also ck. the door jam switchs.gl
Mar 21, 2011 at 4:24 PM
Avatar
RSTPN
  • MEMBER
  • 4 POSTS
checked fuses all ok checked door jamb switches no power no power at trunk light map light all bulbs ok every thing was working 2 days ago then opened door and no lights anywere
Mar 21, 2011 at 5:02 PM
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
remove lenses ck.for power at the sockets and lites.what did u ck the fuses with? they can look good but isnt. check on both sides of the fuse with a test light gl
Mar 21, 2011 at 5:20 PM
Avatar
RSTPN
  • MEMBER
  • 4 POSTS
checked all sockets with test light no power checked all fuses both sides with test light all ok i dont get it they should work
Mar 21, 2011 at 5:27 PM
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
the age of this car leaves me at a loss. but if it were me, i would remove the fuse panel and inspect for heat damage. then ck. the interior light fuse and wiring. tighten all connectors because you have a open wire somewhere.their are some fuseable links by the starter you can ck. by pulling on harnesses you really need a wireing diagram sorry i could not help you more. gl
Mar 22, 2011 at 12:00 AM