1965 INTERNATIONAL SCOUT
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
I replaced the bearings and seals on the front spindles of my scout,. How do I determine the correct load to put on the bearing with the nut?
Jan 20, 2013 at 6:44 AM
Advertisement
Avatar
DRCRANKNWRENCH
  • CERTIFIED EXPERT
  • 3,380 POSTS
Oh this is a togh one. You will need a special spring tool that Advance auto or Auto Zone might have. You will tighten the nut until the springs shows the specified amount of tension.
Jan 20, 2013 at 7:18 AM